Model 720E

Case Erector I Tape I Khon Kaen I

Case Erector
Khon Kaen 720E-10-12CPM

...

FEATURES

• Smaller & Compact footprint
• Robust construction with Powder Coated Steel RAL 7035
• Capable for 8 Cases/ min
• 2400 L x 1500 mm Footprint
• Equipped with Vertical Magazine which saves floor space
• Rugged Construction
• Can be integrated with bottom tape sealing capabilities at an additional cost
• Low air Consumptions
• Fully interlocked guarding with clean polycarbonate
• CE compliance
• Build to comply with Customer’s safety requirements
• Machine can be provide with portability capabilities as an option
• Can be provided in left to right and right to left orientations
• Can be integrated with case packing set up for flexible packing products like 4 side sachet /pillow packs etc

1.Machine Description: This Module consists of

a. Case blanks magazine:
• That stacks case blanks vertically in the magazine.
• Magazine is at 1400mm elevation from floor level which can hold a max of 60 case blanks.

b. Case erect mechanism:
• Serves to pull blank case from the magazine verticallydown, form, rotate the magazine into upright orientation and close bottom flaps.
• Mechanisms of this module are pneumatic.

2. Machine Footprint: Please refer the footprint above

3. Product flow direction: Left to right / Right to left as per customer’s requirements

4. Material of construction: Powder coated Steel

1. Case Size Capabilities:
• Max Dimension:
500L x 300 W x 300H
• Min Dimension:
200L x 200 W x 130H
• All the dimensions are in mm.

2. Machine Output:
• 8 cases/ min

3. Changeover Capabilities:
• Changeover time:
15 mins by 1 x operator (includes conveyor side guidesadjustment

1. Case Erection:
• By means of Vacuum

2. Bottom Sealing:
• By Means of tape

1. Magazine Loading: 1400 mm
2. Case Discharge: 650 – 700 mm

1. Alarms:

• Magazine low level -detection and message display in the HMI
• Guard Open sensers – detection and message display in the HMI
• Emergency Stop – detection and message display in the HMI
• Low Air – detection and message display in the HMI
• Discharge full – detection and message display in the HMI
• Case Jam inside the Machine – detection and message display in the HMI

• E stop at locations (to be aligned with customer)
• ISO 18349 PL-D Compliant safety system
• Can be complied with End Users local safety compliance

• Electricity:
220 v AC, 3 Phase + Neutral, 50 Hz

• Connected Load:2 kW

• Compressed Air:
6 bar consistent supply

1. MTTR & MTBF:
• Mean Time Between Failure:
o 60 minutes
• Mean Time to Repair
o 60 seconds

2. Change Over time
• Changeover time:
20 min by one operator

1. Design Related: Layout and GA Drawing of the Equipment

2. Safety:
• All equipment comply with En-13849 PL-D Safety compliance

3. Electrical:
• Single Line Diagram
• PLC Program Source Code
• HMI program source code
• Comply with Customer’s color coding of wires and cables.
• Comply with Customer’s tower lamp function standards.
Individual wire numbering and device numbering

4. Documentations Related:

• Machine Manual with following sections
a. Operation Manual
b. Spare-parts Manual
c. Trouble shooting section.
d. CIL instructions

• IO / Alarm / Message lists

1. Standard Components (Applicable if used in the Machine):
• PLC and HMI
• Allen Bradley, compact logic PLC HMI Panel view 800 7 inches

• Geared Motors
• SEW Euro drive

• Pneumatics
• Festo / SMC

• Vacuum Cup
• Festo / Vaccon

• Venturi
• ANVER USA / Festo

• Endless Belts
• Ammeraal Beltech

• Stepper Motor and Drives
• Oriental Motor

• Servo Motors and Drives
• Allen Bradley

• VFDs
• Allen Bradley

• Safety System
• Allen Bradley

• Servo Gearbox
• Newstart / Shampoo / Bonfiglioli

• Rollers
• Interroll

• Tape Heads
• NA bottom sealing option isn’t required with this machine

Specifications

Speed

Up to 25 cases/min

Min. case size

Up to 25 cases/min

Sealing

Up to 25 cases/min

Changeover

Up to 25 cases/min

Contruction

Up to 25 cases/min

Upgrade Option

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Resources

Khon Kaen 720E
Download

Khon Kaen 720E

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.

Gravity fed magazine ensures that each blank is in proper position for picking without having to worry about proper angles and placement of boards.